Table Top Jewellery Laser Welding Machine
Co2 Laser marker adopts imported high quality RF tube , RF Tube ( Metal Tube) has long life , High Stability, Good Beaam quality, also high performace, RF tube is very much suitable for industrial application where long time operating stability is required.
Co2 Laser can mark and engrave non metal products like leather, acrylic, glass,wooden surface, ceramics, buttons, fabrics and clothings, crystal etc.
Co2 is poplar in Pharmaceutical, food and beverages,textile , Cosmetics, electronics, crafts gifts etc.
| Model | C30 / 60 / 80 | CA30 / 60 | CS30 / 60 / 80 |
| Laser | CO2 | CO2 | CO2 |
| Wavelength | 10.6 µm | 10.6 µm | 10.6 µm |
| Average Output | 30W / 60 W/80W | 30 W / 60 | 30 W / 60 W / 80 W |
| Marking Area | 100 x 100 mm 150 x 150 mm | 100 x 100 mm 150 x 150 mm | 200 x 200 mm 400 x 400 mm |
| Marking Speed | ≤ 7000 mm/s | ≤ 7000 mm/s | ≤ 7000 mm/s |
| Min. Line Width | 0.12 mm | 0.12 mm | 0.12 mm |
| Min. Char. Width | 0.4 / 0.5 / 0.6 mm | 0.4 / 0.5 mm | 0.4 / 0.5 / 0.6 mm |
| Cooling method | Water | Air | Air / Water |
| Power Consumption | 22v V / 15A | 22v V / 15A | 22v V / 15A |
| Electrical Requirement | 22v V / 20A | 22v V / 20A | 22v V / 20A |
| Dimensions | 1400 x 300 x 350 mm | 1400 x 300 x 350 mm | 1400 x 300 x 350 mm |
| Weight | 140 kgs | 140 Kgs | 140 Kgs |